Watertight Storage Case Company - Heavy Armor 2000 Installation Instructions

PO Box 706
Norfolk, NE 68702
Info@WaterTightCase.com
Fax: (707) 276-1061

Series 1000
Series 1300
Series 2000
Series 2300
Series 2500
Series 3000
Series 3500
Series 5000
Series 5500
Series 6000
Series 6500
Series 8000
Series 9000
Heavy Armor 2000
Company Logos
Electronic Equip. Storage

Instructions for Installing Your PDA
in a Heavy Armor 2000 Case

Your PDA will fit into the Heavy Armor Series 2000 watertight cases
when you follow these instructions.

Always keep the Silicon gaskets clean and free from sand and dirt. Contamination can lead to leaking of the case. Armor 2000 is not designed for underwater use.

Please verify your equipment as not all PDAs will fit the
Heavy Armor 2000 cases we currently offer.

Compaq Models do not fit with the Dual Expansion Sleeve or the PC Expansion Sleeve

Click here to see which PDAs can be stored in these Heavy Armor series watertight boxes.

Buy your Heavy Armor 2000 Series case now to protect your equipment!

Step 1	Step 2

Open both of the side closure latches.	Open lid 180 degrees and hold in this position.
Step 3	Step 4

Place PDA face down on top of the clear screen saver. Do not flip the case over. Note: When using the Compaq iPAQ PDA you must use the expansion sleeve.	Move the PDA side to side and front to back until you feel the PDA features have located themselves on the screen saver. Do not flip the case over.
Step 5	Step 6

With the case in the same position close the clear bottom cover on top of the PDA to hole it in place.	Close latches on the side until they snap shut. Now you can flip your new case and PDA over and use the unit.